By Bondtech and Slice Engineering This LGX ACE Magnum is a special short filament path hotend, co-developed by Bondtech and Slice Engineering, to be used with the LGX eXtruder. It features Slice’s Mosquito Magnum bi-metallic heat-break technology and Copper industrial grade hot block for improved thermal performance and melt flow capacity. Pairing it with the LGX forms an industrial grade print head that will excel at printing ALL most common materials and especially the soft and flexible. Engineered To Give More Flow During the long months of deep testing that preceded the launch of the LGX CHT nozzles, Bondtech discovered that shortening the post-drive filament path generates increased volumetric flow rate capacity. Similar to the LGX ACE Mosquito , the LGX ACE Magnum delivers a significant increase when comparing to the full Mosquito Magnum hotend. Designed To Be Cooler The LGX ACE Magnum Hotend features a monolithic air-cooled cold block and heat sink, designed and manufactured by Bondtech, that engages with the LGX extruder using its interface plug and rests at the front of the extruder. The heat sink includes the hole pattern for attaching 40×40 fans. Our tests suggest a 4010 fan is enough to cool down the cold block and the cold zone of the heat break, due to the monolithic design of the cold block and heat sink that increases heat transmission and dissipation. Compatibility Alerts The LGXACE Magnum Hotend is not compatible with the following items: 3DSolex Matchless 1.75mm nozzles. Compatible nozzles The hot block included in this product is compatible with the RepRap standard of nozzles. Below is a list of compatible versions. Click each link to open the related product page. From Bondtech Standard Brass Standard Coated Brass CHT Coated Brass From Slice Engineering BridgeMaster (Copper) Vanadium Steel (for abrasive filaments)
