Each LGX Shortcut Mosquito™ Hotend is supplied with: 1x LGX Black Anodized Aluminum Heat Sink 1x LGX Black Anodized Aluminum Air Cooled Cold Block 1x LGX Air-cooled Cold Block Mounting Hardware 1x Mosquito hotend (Conduct version, without heatsink) 1x Bondtech M6x1x7.5 Coated Brass Nozzle 0.4mm 1x Silver Based Thermal Paste Sachet 0.5g Designed To Be Flexible The LGX Shortcut Mosquito Hotend includes a reversible heat sink that can be installed on the left or right hand side of the cold block. The heat sink also includes the hole pattern for attaching 40×40 fans. Cooling down the heat break Our tests suggest a 4010 fan is enough to cool down the cold block and the cold zone of the heat break, even with such small contact surface to the heat sink. In case you have an application where additional cooling is required, try using a 4020 fan or 2 LGX heat sinks, one on each side. Main Advantages Robust hotend One hand nozzle swap Gives better access to softer materials. Enables to print flexible and soft materials faster. Keeps the print-head small and light. Allows mounting in many different ways. Compatibility Alerts The LGX Shortcut Mosquito Hotend is not compatible with the following items: 3DSolex Matchless 1.75mm nozzles. Compatible nozzles The hot block included in this product is compatible with the RepRap standard of nozzles. Below is a list of compatible versions. Click each link to open the related product page. From Bondtech Standard Brass Standard Coated Brass CHT Coated Brass From Slice Engineering BridgeMaster (Copper) Vanadium Steel (for abrasive filaments)
