Included in this kit: 1x Copperhead P Mini heat-break 1x 32.8mm 2/4 chamfered PTFE tube 1x Silver based thermal paste bag [14118] Recommendation We recommend to use the included silver based thermal grease to properly fit the P Mini heat-break in the Prusa Mini’s heat-sink. Notes on twisting the heat-break To address the heat creep issues the design features a narrow steel throat with thin walls. When removing the heater block or changing nozzles, caution is required. Before removing the heater block from the heat-break (or vice versa), heat-up the nozzle, hold the heater block and release some tightening pressure from the nozzle. Let the whole group cool down. After, you can simply unscrew the heat-break from the heater block. To remove or replace a nozzle, never forget to secure the heater block before twisting the nozzle. Check the Setup Guide [ 3 Pre-flight check / Step 1 Hot Tighten The Nozzle] for more detailed guidance.
