Product Includes: Bondtech DDX v3 For Creality DDX V3 Adapter Set for CR-10 V2 or V3 The DDX v3 is much easier to install With this integrated fan shroud and mount the DDX v3 is even easier to install. Snap the fan to the shroud without using screws. Adjust the height of the shroud with one front access screw. Using a bed probe with DDX The DDX was designed to allow space for the bed probe to be attached to the x-carriage. In models where there is no space to attach a bed probe like the BLtouch, to the X-carriage, a mount can printed and attached to the right hand side of the DDX. Bondtech DDX Direct Drive eXtruder This Direct Drive eXtruder from Bondtech is a high performance, high reliability 1,75mm Dual Drive extruder for Creality 3D printers, based on our very popular BMG. Bondtech’s unique Dual-Drive technology combined with either the factory hotend or for even better performance the industry leading hotends Copperhead™ or Mosquito™ from Slice Engineering, gives you a direct drive extruder with trouble free material feeding and enables the use of a wider range of materials. The housing parts are printed with PA12 (polyamide) for maximum strength and precision using industrial grade SLS technology. Make your 3D printer even better Bondtech DDX Direct Drive eXtruder for Creality is designed to give the user more options – different materials; higher flow and/or wider nozzles; thinner layers – and achieve a higher print quality. The DDX is based on the BMG Bondtech Mini Geared extruder featuring our unique Dual-Drive technology. The DDX housing design provides an effective Hot-End cooling. With the 3:1 gearing ratio, high resolution prints with small nozzles or high flow prints with bigger nozzles can be achieved. Easy To Setup For ease of setup the kit is attached to the carriage with only 2 screws. Packing List: From the DDX V3: 1x DDX v3 Extruder 1x Nema17 Pancake stepper motor 1x Thumbscrew Assembly 1x 70cm Stepper motor extension cable 1x 60cm PTFE tube 1x 7cm Capricorn tube 4x Zip-ties 3x M3x12mm screw 2x M3x20mm screw 1x M3x10mm button head screw From the CR-10 V2/V3 accessories set: 1x 10079-5-T DDX 5015 Fan Shroud; 1x 10079-65 DDX Mount Plate for CR-10 v2; 1x 10079-45 DDX Bowden Mount (supplied with a tapered thread to better fit the stock metal threaded push-fit); 1x 10079-80 DDX Z-Sensor Plate for CR-10 v2; 7x M3 Square Nut; 2x M3x25 Screw; 2x M3x20 Screw; 1x M3x10 Screw; 1x M3x8 Screw. When upgrading your Creality with DDX Know more about the different ways to upgrade your Creality with DDX here: The 4 Phases of Bondtech DDX for Creality
